High Temp Kapton
High Temp Kapton
is this a good buy? its 2 subs but i dont think its a well know brand price $300?
Power Handling:
Peak: 6000 watts PER PAIR! 3000 watts EACH SUB!
RMS: 3000 watts PER PAIR! 1500 watts EACH SUB!
Reinforced Ribbed High Foam Treated Surround
Bumped Back Plate For Maximum Excursion
400 oz. Double Stacked Strontium Magnets
Patented Thermo-Cooling Motor Structure
Dual Layer Pressed Carbon Fiber Cone
Ultra Strong Carbon Fiber Dust Cap
Hi-Temp Kapton Voice Coil Former
Aluminum Round Wire Voice Coil
Double Layer Progressive Spiders
Platinum Plated Block Terminals
Dual 2-Ohm Voice Coils
Rubber Sealant Gasket
Die-Cast Basket
2-year Manufacturer's warranty
brand is MA audio
Being CEA-2006 compliant applies to amps/decks ONLY, not speakers or subs.
Those are some high powered subs that can take some high powered amps....
If your total system power is 1000 watts RMS or more, you will need to:
1. Upgrade the alternator to a high output alternator
2. Upgrade to a heavy duty deep cycle battery
3. Upgrade the "Big 3" - that is to replace the power wire between the battery and alternator, the ground from the battery to the chassis and the ground strap from the engine/tranny to the chassis with at least 1/0 AWG wire.
Failure to do this will result in you replacing them anyway as the alternator will eventually fail.
Here is a guide that will calculate what size alternator and power wires you need http://www.datafilehost.com/download.php?file=6d26c621
A second battery is never a good idea as it's an added strain on the alternator to charge two batteries AND supply power for the car. The ONLY time a second battery is useful is if the audio system is to be used with the car off.
A cap is only good so far as the audio system isn't trying to pull too much from the electrical system. A cap doesn't provide more power, it's designed to 'stiffen' the voltage to the amp, nothing esle. If the current isn't there, a cap won't help. The alternator must have at least 20% more amperage power than the entire vehicle and sound system combined for a cap to be of benefit which is ironically the same requirements for an amp to be efficient.
See my site for more info http://spkrbox1.spaces.live.com
 |
 Gold Kapton Tape Polyimide High Temp 1" x 36yds 25mm  US $9.99
|
 Gold Kapton Tape Polyamide High Temp - 0.2" wide US $2.99
|
 Gold Kapton Tape Polyimide High Temp 5/8" x 36yds 16mm US $6.29
|
 Gold Kapton Tape Polyamide High Temp 3/8" x 36yds 10mm US $4.49
|
 Gold Kapton Tape Polyimide High Temp 2" x36yds 50mm US $15.93
|
 Gold Kapton Tape Polyamide High Temp - 2.0" wide US $11.99
|
 3" high temp Kapton polyimide tape 76mm*108ft sillicone US $16.99
|
 Gold Kapton Tape Polyamide High Temp - 0.3" wide US $3.99
|
 Gold Kapton Tape Polyamide High Temp - 0.6" wide US $6.99
|
 5 rolls 1/2inch high temp polyimide PCB Kapton tape13mm US $15.99
|
 1/2" X36 Yds Kapton Tape High-Temp Resistant for RGA -Free Ship from Canada US $9.99
|
| Powered by phpBay Pro |